FAIL (the browser should render some flash content, not this).

How to use

Wet Magic Foam™ with water. Lightly wipe over the soiled surface to remove stains and dirt. You can reuse the Magic Foam™ until it gets worn out and then replace it.

Magic Foam™ may be cut down to size to suit, so you can have smaller pieces for smaller jobs. First, simply wet the sponge thoroughly with water, gently squeezing out any excess. Gently rub the sponge on your chosen surface for amazing cleaning power Apply even pressure on sponge when cleaning to ensure best results Rinse sponge often to remove trapped dirt and grime. Wipe the clean area with a dry cloth afterwards if required.


Magic Foam™ may be used over and over again until the sponge totally disintegrates. Works like an eraser, removing all kinds of marks on many surfaces. Is a highly effective cleaning tool and should be tested on a hidden area prior to use. It is not recommended for use on highly polished surfaces or automotive paintwork.


Avoid twisting and tearing your Magic Foam™ during use. Before using your Magic Foam™ on delicate or polished surfaces ( e.g. leather, auto paint etc.) always test on a concealed area to ensure it won’t scratch the surface. Polishing is recommended after cleaning.


Magic Foam™ is a consumable product, continue to use it until it is ready to be discarded. Ensure electronic equipment is switched off before cleaning Magic Foam™ is a new and highly unique cleaning product that uses only water to erase stubborn marks. Magic Foam™ is a multi-purpose cleaner that effectively removes stubborn marks without the need for harmful chemical cleaners.

Magic Foam™ can be used on any smooth and non-porous area of the home or office.

How to Use

  • Cut into required size (if necessary).
  • Soak in water and gently squeeze. (Do not fold the sponge when squeezing).
  • Gently rub the Magic Foam™ sponge over the dirty area.
  • Once the dirt is removed, wipe the surface with a dry clean cloth.
  • Rinse Magic Foam™.

Magic Foam™ will wear like an eraser to remove stubborn marks.


  • Use gently like an eraser.
  • Spot test on all surfaces to ensure no discoloration.
  • Don't use on sharp edges or rough surfaces as it can damage the sponge.
  • Don't use on highly polished surfaces such as a car as it may dull the paintwork.
  • Don't eat or use on the human body.